If you have a private well located on your property to provide you with the water you use in your home, you will undoubtedly want to take some necessary steps to keep it from getting contaminated. When well water is compromised, there is the risk of illness to anyone who drinks it. There are several maintenance steps you can take to ensure that your well water is always in the best possible condition.
Take Care In The Placement Of Hazardous Substances
Anything that seeps into the ground near your well is a risk. These items can contaminate the water inside your well with bacteria or harmful chemicals. When treating your lawn for pests or trying to improve its growth, consider ditching the chemical agents and use organic methods instead. Do not set a gasoline container or lawnmower near your well to minimize the chance of a gasoline spill getting into your tank. If you have a dog or cat, do not allow them to frequent the area of your well to eliminate, as pet waste can add bacteria to your water.
Do Regular Inspections Of The Well Structure
Your well will have a cap protruding out of the ground indicating its placement. If this well casing is loose or cracked, there is a chance of contaminants getting inside the enclosure. Insects or small rodents may also burrow into the crack, leading to the chance of bacteria from their presence. If the casing moves around, there may be a gap that allows foreign substances to get into the well. If you hear trickling water near the casing, there is a chance that a valve is not working properly. These flaws can all lead to dirty water. If any of these scenarios occur, call an inspection service to check over your well so it can have any necessary repairs.
Test And Disinfect The Water For The Best Quality
It is a good idea to have your well water tested at least once a year so you can remedy any flaws in its consistency. Tests can be conducted by your county's Health Department. If there is a problem with your water, they will recommend disinfecting it with chlorine bleach. Chlorinating a water well can be done on your own, but you will need to avoid using water for a day or two afterward to allow the bleach to circulate throughout the container. After this is done, another test of the water should be done to ensure its properties are once again safe for consumption.
For more information or assistance, check out companies like Golden Gate Well Drilling & Water Conditioning.Share